Useful Jtag/Rgh Tutorials - Update To Latest Dash In 3-4 Minutes | DASH: 17489

​

​

​

LATEST DASH 17489​

​

Video Tutorial​

​

[youtube]https://www.youtube.com/watch?v=brjoiVVopFg[/youtube][/spoil]​

​

Text Tutorial​

Step 1:​

Plug in a FAT32 formatted Flash Drive into your Laptop or PC​

Step 2:​

Create a new folder on your Flash Drive called 16767​

Step 3:​

Put Flash or Simple 360 in the folder and extract it​

(Simple 360 Slim and higher Flash 360 for Lower than slim)​

Step 4:​

Plug USB into JTAG/RGH​

Step 5:​

Run XeXMenu 1.1 or 1.2​

Step 6:​

Press RB then Left on DPAD until you find your Folder (17489)​

Step 7:​

Hit A on the folder and hit A again on Flash or Simple 360​

Step 8:​

Hit A on Default.XeX​

Step 9:​

Hit X​

Step 10:​

Wait for the proccess to complete and hit B or any button​

Step 11:​

Unplug your Flash Drive and stick it back into your computer​

Step 12:​

Open XeBuild as Administrator (Right Click run as administrator)​

Step 13:​

Hit Open Path​

Step 14:​

Open FLASHDMP.BIN In Your 17489 Folder on Flash Drive​

Step 15:​

Make sure everything is Checked {Thicked} (Bottom Screen)​

Step 16:​

Thick Include Dashlaunch​

Step 17: ​

Generate Hacked Image​

Step 18:​

Delete FlashDMP.BIN from your Flash Drive (Back it up if you want to)​

Step 19:​

Open XeXMenu and Run Flash 360 or Simple 360​

Step 20:​

Now head back to your USB device and BACKUP the flashdmp in a safe location as you need to delete it of the USB.​

Step 21: ​

Now copy the updflash.bin file onto the USB and eject the USB and plug it back into your JTAG/RGH.​

Step 22:​

Once again boot the JTAG-RGH as normal and go into the retail dashboard and boot xex menu, and head to the location of Flash 360.​

Step 23:​

It Should Look Like This​

​

You will now get the same blue screen as before but this time press. ​

A button twice.​

The start button.​

Then the A button.​

This will now write the new nand img to your console and look like this.​

​

Step 24:​

Once this has completed press any button to continue.​

​

And you will be back to this screen.​

​

Step 25:​

THIS IS THE MOST IMPORTANT PART SO FOLLOW IT CAREFULLY.​

​

Once you press back the screen will countdown to 0 once it has turned off unplug EVERYTHING from the console this means ALL USBS HDMI POWER AND THE MAIN HDD.​

​

LEAVE THESE UNLPGED FOR 30 SECONDS THEN PLUG THEM BACK IN.​

​

Once 30seconds are up plug everything back into the console and you should have your new dash 2.0.17489.​

​

*** Note please ***​

​

If you boot up and your console freezes when you power on,hold the eject button untill the console loads up the dashboard then go to dashlaunch and take the xblse.xex plugin off and save your launch.ini​

​

Once the console has booted go into settings and check your dash.[/spoil]​

​

​

Download​

https://xbls.ninja/xeBuild_GUI_and_DL.zip​

​

​

Virus Scan​

https://www.virustotal.com/en/file/...1ac8e971549530c235ef36bff79d51bd00c/analysis/​

​

​

​

​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=s5qNlUPRZQA[/youtube]​

​

​

Text Tutorial​

Step 1 : Download Xexmenu 1.2 and extract it to your desktop. ​

Step 2 : Go into the folder you just extracted and keep opening the folders untill you see C0DE99990F586558 file. ​

Step 3 : Open Horizon and plug your xbox configured usb into your computer ​

Step 4 : Once you have your configured usb into your computer and opened horizon go to device explorer. ​

Step 5 : Open your usb in device explorer right click on demos and select inject file then navigate to the file called Content\00000000000000000\C0DE99999\090000\ folder that your extracted earlier wait 5-10 mins for the file to be put on your usb. ​

Step 6 : Unplug your usb from your computer plug it into your jtag / rgh on the console go to system settings then storage and select your usb. Go into your demos folder on your usb you will see xex menu 1.2 click on that and move it to your hard drive. ​

To use it go to dashboard go over to games then my games and it will be there​

​

Downloads​

XEX Menu 1.2:​

http://www.firedrive.com/file/7B86B9DCC2A29567​

​

Horizon:​

https://www.horizonmb.com/​

​

​

​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=dMS-FXXAHW0[/youtube]​

​

Download Including Latest Dash Update​

http://www.mediafire.com/download/71l4d008ebs1m6v/xeBuild_GUI_2.093+%2816767%29.zip​

​

​

​

2:Getting Your Nand Of Your Jtag​

Step1 - Is putting Flash 360 onto a USB and putting it into your xbox.​

Step2 - To navigate to Xexmenu 1.1 and find the storage device you placed it on.​

Step3 - Click the Flash360.xex to run the program.​

Step4 - Now select the X button and then the A button.​

Step5 - When it's done it will say finish and to hit any button, do so.​

Step6 - Hit the back button two times and remove your USB. Your Ready to Move On!​

​

3:Updating to latest Kernel and installing Dashlaunch​

DASH UPDATE PLEASE GO ABOVE ​

Dash Launch Installation:​

Download:​

https://dl.dropboxusercontent.com/u/27134420/dash_launch_v3.11.zip​

​

Virus Scan:​

https://www.virustotal.com/nl/file/5c016166e04eceb08a77a8d41028e44c246cad2da17cbe36843e0613f68f907a/analysis/1393651299/​

4:Uploading the new nand​

Step1 - Navigate back to Flash360.xex.​

Step2 - Here is the difference, now select the A button and then the B button to upload.​

Now reboot your xbox.​

​

5:Setting up DashLaunch to connect to the Xbox Live Stealth Servers​

DOWNLOADS​

XBLSE FILES:​

https://dl.dropboxusercontent.com/u/27134420/XBLSE files.rar​

​

VIRUS SCAN:​

https://www.virustotal.com/en/url/f7fd5d83b6ad9b83bf8d36dc08aa03aca3938f02a86200d5bdad932ac2ced6fa/analysis/1396459781/​

​

XBLSE TOKENS:​

FIND ON GOOGLE​

​

Step1 - Place all XBLSE (Xbox Live Stealth) Files onto you USB and plug it into the xbox.​

Step2 - In Xexmenu 1.2, navigate to those files.​

Step3 - Place all of the files from that folder onto the root of your Hdd1 Drive.​

Step4 - To copy hit the Y button and select copy.​

Step5 - Then to paste hit the Y button and paste.​

Step6 - When all the files are on the root of your Hdd1 find DashLaunch.​

Step7 - Open the DashLaunchs default.exe.​

Step8 - Now go down to plugins and select the A button.​

Step9 - For plugin1 select the A button and then the Hdd1 and find the XBLStealth.xex and select then the A button again.​

Step10 - For plugin2 select the A button and then the Hdd1 and find the xbdm.xex and then the a button again.​

Step11 - To save all of this select RB and then scroll down to the Hdd and hit the X button.​

​

6:Getting a new KV onto your xbox.​

Step1 - Get the KV.bin and place it onto your USB and plug it into your xbox​

Step2 - Copy and paste the KV.bin onto the root of your Hdd1.​

Step3 - Shut off your xbox and turn it back on. If you did it right it should turn itself off and then back on again.​

​

Troubleshooting​

If you get and error 80151903 that looks like this, then. (Also could be because XBLSE is out.)​

Step 1 - Go to Network Settings.​

Step 2 - Click your internet.​

Step 3 - Go to Configure Network.​

Step 4 - Additional Settings Tab.​

Step 5 - Restore to Factory Defaults.​

Step 6 - Reconnect to your internet.​

​

​

​

​

Text Tutorial​

Download Nxe2God ​

Make a folder called Nxe2God and then extact the files into it. ​

Then add the folder to your USB that you use with your JTAG. ​

Plug the USB in your JTAG and then open Xex Menu.​

Then click X and then select your USB. ​

Then open your Nxe2God folder and then click on default.xex ​

Then it will run Nxe2God​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=l9XrlYcVH3c[/youtube]​

​

Instructions​

Now that you have Nxe2God on your Xbox​

Install a game​

Launch from what ever method ​

Now it will find the game you installed and ask you if you want to convert it​

Click a then it will​

Then click any button to close NXE2GOD​

​

Downloads​

http://www.mediafire.com/download/3z1g1gq9k27e8i9/NXE2GOD.rar​

​

​

​

Text Tutorial​

Now once you have all of your downloads in order put dash Launch and the xbdm.xex on a USB. ​

​

#2 Navigate to your USB through XeX menu or FSD. You should see the following, so go ahead and move the xbdm.xex and the xbdm.ini to the root of your HDD and then execute the default.xex in the Installer folder.​

​

#3 This will bring you to Dash Launch where you can manage things such as button paths and behaviors, add other plugins, or adjust other tweaks. All of the modifications I am doing here can be done on your launch.ini file, but I prefer to do it through dash launch.​

Hit the RB, and you will see this screen. load the launch.ini file from your HDD. (To bring up a controller layout for each menu, just hit the back button)​

https://www.horizonmb.com/external/58ff094504ffa7e793f9affd4cef4125​

​

#4 Now press RB again until you are at the main screen, navigate down to the +Paths as shown here and hit A, then navigate to the root of your HDD and select the xbdm.xex. Then hit RB once more and ht X to save the launch.ini file to your HDD.​

https://www.horizonmb.com/external/070d8f4fbac446e7ed868a77a18c2df9​

​

#5 Now restart your console to enable the dash launch changes. Now navigate back to XeX Menu, and hit the RB twice to see the system info screen, and take note of your IP Address.​

https://www.horizonmb.com/external/76e0e84910820d008d07259c5f20686c​

​

#6 Now onto the computer side. Assuming you have already installed Xbox 360 Neighborhood (and if not, do so now), open up your Desktop icon. You will see this pop up, go ahead and click on "Add Xbox 360".​

​

#7 You will now have this box pop up. Type in your 360's IP, and it will ask you if you would like to make it the default dev kit, select yes.You will now have this box pop up. Type in your 360's IP, and it will ask you if you would like to make it the default dev kit, select yes.​

https://www.horizonmb.com/external/663cf5367f6a1d5cb45fac5bc36557a1​

​

#8 You will now see this on your main folder:​

https://www.horizonmb.com/external/363654cee8a36629402abf99c3070618​

​

#9 You now have an active connection to your RGH/JTAG through the Xbox 360 Neighborhood! There are a number of uses for using the Neighborhood from screen capping, to exploring your 360's memory units and executing .xex files remotely, or using it to FTP files directly to your 360.​

https://www.horizonmb.com/external/90ebc663b0117d972147189bee49478f​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=wu3DryOcGcQ[/youtube]​

​

Downloads​

Plugins​

For SDK you have to find that your self as XPG doesnt allow torrents i dont think​

​

​

​

Text Tutorial​

Step1.Open XeX Menu ​

Step2.Create a Folder Called "Games" ​

Step3.Go Inside That Folder Crate Another On Inside Games Name It The Game You Are Installing. ​

Step4.Press Y Copy Dvd Put Disk In Count To 10 Manually Push The Tray Shut Then Wait For It To Install. ​

​

To Load Up The Game Go In To The Game Folder Then The Game You Copied Press Down "Ls" Click Default_mp.xex ​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=_idkeajIPS8[/youtube]​

​

​

​

​

[youtube]https://www.youtube.com/watch?v=jArKpoCGTaI[/youtube]​

​

​

​

​

Retrieving our license key​

First off you want to open DLCPatcher.exe and click open file and locate the DLC what you own,on the second line down you will see some numbers and letters (i hid half of mine). That is your license, its tied to your XBL account and the DLC needs that licence to work on your account so make a note of this as you will need it later.​

​

Getting the DLC ready to put your key into​

Now you need to Yaris Swap the DLC before you put your key into it, This may already be done if you downloaded it from the internet but to check load up the DLC in DLC patcher.​

Now we need to get our DLC to look like like that so if it already does you can move onto the next spoiler, if it doesn't keep reading.​

Open up YarisSwap.exe and locate the DLC you want​

Then hit the "Hex mod - Yaris Swap" button (its hard to miss)​

Now you have Yaris swapped the file, if you open it in DLC Patcher you will see the FFFF's​

​

​

Hexing in your own license​

Now we have to enter our own license what we found earlier into the DLC we want.​

To do this we need to open our DLC in a hex editor​

Now use Ctrl+F to start a search and key in:​

Code (Text):​

ff ff ff ff ff ff ff ff​

make sure type is selected as Hex!​

when you click find you should see something like this:​

The parts of the HEX are color coded with the parts you saw in the DLC Patcher.​

what you now want to do is replace the RED and YELLOWFFFFFFFF's with your license.​

For example, if ,my license was a1 00 00 2e 9d 4e 00 e1 it would look like this:​

Then you will click save and it should save within a couple of seconds. ​

If something like this appeared for a long period of time it means that you have added extra data not overwritten it so you should quit the HEX editor and load a fresh copy ​

Now, once you have successfully saved the file, if you open it up in DLC Patcher again you should see something like this where a100002e9d4e00e1 would be your license:​

​

Putting the DLC on your console (Transfer cable method)​

First off you want to load xPort 360, select your hdd and navigate to Partition 3> Content> 0000000000000000>​

Now you need to copy the folder (correctly sorted and named (Should be but if not grab XBox Live DLC sorter, run it, select the location of the DLC and it will correctly make the directory and names the DLC needs, you just have to copy the folder inside the Sorted folder to 000000000000000 on the Xbox HDD ​

Now you have the DLC on the HDD, you need to put the TU on the HDD with the game, Im not 100% sure where to get them from and where to put them for other games but for MW2 you need to place the Patch_mp.ff and the default_mp.xex into the extracted MW2 on your HDD (see this topicon how to extract your MW2 iso to your hdd)​

​

Downloads​

A HEX editor​

YarisSwap​

DLC patcher​

​

​

​

Text Tutorial​

If you load up your NAND in J-Runner, it's fairly simple:​

​

Navigate to Advanced > Patch NAND:​

​

Now you can change the KV info to whatever you want it to be:​

​

​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=24AwZbCdWgo[/youtube]​

​

Downloads​

http://www.mediafire.com/download/wq6btq6d17a9fv3/J-Runner+v03+%281%29+Core+Pack.rar​

​

​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=2vdw-GTElP0[/youtube]​

​

​

Video Tutorial​

[youtube]https://www.youtube.com/watch?v=iZlvQAd8auE[/youtube]​

​

Text Tutorial​

1. Download SNES360 and a ROM (game) you want using the links above; in this tutorial I will be showing you using Super Mario. ​

2. You will need to make a folder called Emus. ​

3. Now make a folder inside the Emus folder called SNES360.​

4. Then inside the SNES360 folder, make a folder called ROMS. ​

5. Now, inside the ROMS folder; extract the ROM (game) you downloaded.​

6. Next, extract the SNES360 file you downloaded at the start to a location of your preference. ​

7. Now move the FFEDO707 folder (The SNES360 file you downloaded) and the "EMUS" folder onto your USB Memory Memory Stick and plug into your JTAG. ​

8. Now go to XEXMENU; press RB to go to USB, then copy the "EMUS" folder and paste it into your HDD. It will be the first thing on your HDD, where content and cache is​

9.Then copy FFED0707, go to content > 0000000000000 and paste it in there. ​

10. Go to Dashboard > Game Library > SNES360 > ROMS > (Press RB twice) > Choose the ROM you downloaded, now enjoy.​

​

Downloads​

SNES360​

Roms​

​

​

​

CONTACT​

Skype: agrohhd​

aim: gulpkvs​

​

​

​

ADDING MORE SOON​

WILL UPDATE WHEN NEW FILES AVAILABLE​